| ►NCustom | |
| CVec | A Vector class with the absolute minimum of built-in methods to test the interface expected from Vectors used in Traits |
| ►NOpenMesh | Contains all the mesh ingredients like the polygonal mesh, the triangle mesh, different mesh kernels and mesh traits |
| ►NAttributes | This namespace holds per item attributes like normal/color |
| CStatusInfo | Add status information to a base class |
| ►NConcepts | Descriptions of the concepts used in OpenMesh |
| CKernelT | This class describes the minimum interface a mesh kernel has to implement (because the resulting mesh will rely on this interface) |
| ►CMeshItems | The mesh items class encapsulates the types VertexT, HalfedgeT, EdgeT, and FaceT |
| CEdgeT | Interface for the internal edge type |
| CFaceT | Interface for the internal face type |
| CHalfedgeT | Interface for the internal halfedge type |
| CVertexT | Interface for the internal vertex type |
| ►NDecimater | Software related to mesh decimation |
| CBaseDecimaterModule | Base class decimater framework |
| CBaseDecimaterT | |
| CCollapseInfoT | Stores information about a halfedge collapse |
| ►CDecimaterT | Decimater framework |
| CHeapInterface | Heap interface |
| CMcDecimaterT | Multiple choice decimater framework |
| CMixedDecimaterT | Mixed decimater framework |
| CModAspectRatioT | Use aspect ratio to control decimation |
| CModBaseT | Base class for all decimation modules |
| CModEdgeLengthT | Use edge length to control decimation |
| CModHandleT | Handle for mesh decimation modules |
| CModHausdorffT | Use Hausdorff distance to control decimation |
| CModIndependentSetsT | Lock one-ring around remaining vertex after a collapse to prevent further collapses of halfedges incident to the one-ring vertices |
| CModNormalDeviationT | Use Normal deviation to control decimation |
| CModNormalFlippingT | Decimating module to avoid flipping of faces |
| ►CModProgMeshT | Collect progressive mesh information while decimating |
| CInfo | Struct storing progressive mesh information |
| CModQuadricT | Mesh decimation module computing collapse priority based on error quadrics |
| CModRoundnessT | Use Roundness of triangles to control decimation |
| CObserver | Observer class |
| ►NGeometry | |
| CQuadricT | /class QuadricT Geometry/QuadricT.hh |
| ►NHoleFiller | |
| CHoleFillerT | |
| ►NIO | This namespace contains functions for reading and writing polygonal meshes and a list of supported file formats |
| C_IOManager_ | This is the real IOManager class that is later encapsulated by SingletonT to enforce its uniqueness |
| C_OBJReader_ | Implementation of the OBJ format reader |
| C_OBJWriter_ | This class defines the OBJ writer |
| C_OFFReader_ | Implementation of the OFF format reader |
| C_OFFWriter_ | Implementation of the OFF format writer |
| C_OMReader_ | Implementation of the OM format reader |
| C_OMWriter_ | Implementation of the OM format writer |
| C_PLYReader_ | Implementation of the PLY format reader |
| C_PLYWriter_ | Implementation of the PLY format writer |
| C_STLReader_ | Implementation of the STL format reader |
| C_STLWriter_ | Implementation of the STL format writer |
| C_VTKWriter_ | |
| CBaseExporter | Base class for exporter modules |
| CBaseImporter | Base class for importer modules |
| CBaseReader | Base class for reader modules |
| CBaseWriter | Base class for all writer modules |
| Cbinary | The struct defines how to store and restore the type T |
| Cbinary< MyData > | |
| Cbinary< MyMap > | |
| Cbinary< RegisteredDataType > | |
| CExporterT | This class template provides an exporter module for OpenMesh meshes |
| CHandle2Prop | |
| CHandle2Prop< T, FaceHandle > | |
| CHandle2Prop< T, VertexHandle > | |
| CImporterT | This class template provides an importer module for OpenMesh meshes |
| COptions | Set options for reader/writer modules |
| ►NIterators | Contains all mesh iterators and circulators |
| CConstEdgeIterT | |
| CConstFaceIterT | |
| CConstHalfedgeIterT | |
| CConstVertexIterT | |
| CEdgeIterT | |
| CFaceIterT | |
| CGenericCirculator_CenterEntityFnsT | |
| CGenericCirculator_CenterEntityFnsT< Mesh, typename Mesh::EdgeHandle, CW > | |
| CGenericCirculator_CenterEntityFnsT< Mesh, typename Mesh::FaceHandle, false > | |
| CGenericCirculator_CenterEntityFnsT< Mesh, typename Mesh::FaceHandle, true > | |
| CGenericCirculator_CenterEntityFnsT< Mesh, typename Mesh::VertexHandle, false > | |
| CGenericCirculator_CenterEntityFnsT< Mesh, typename Mesh::VertexHandle, true > | |
| CGenericCirculator_DereferenciabilityCheckT | |
| CGenericCirculator_DereferenciabilityCheckT< Mesh, typename Mesh::EdgeHandle, typename Mesh::FaceHandle > | |
| CGenericCirculator_DereferenciabilityCheckT< Mesh, typename Mesh::FaceHandle, typename Mesh::FaceHandle > | |
| CGenericCirculator_DereferenciabilityCheckT< Mesh, typename Mesh::VertexHandle, typename Mesh::FaceHandle > | |
| CGenericCirculator_ValueHandleFnsT | |
| CGenericCirculator_ValueHandleFnsT< Mesh, CenterEntityHandle, typename Mesh::FaceHandle, CW > | |
| CGenericCirculator_ValueHandleFnsT_DEPRECATED | |
| CGenericCirculator_ValueHandleFnsT_DEPRECATED< Mesh, CenterEntityHandle, typename Mesh::FaceHandle > | |
| CGenericCirculatorBaseT | |
| CGenericCirculatorT | |
| CGenericCirculatorT_DEPRECATED | |
| CGenericIteratorT | |
| CHalfedgeIterT | |
| CVertexIterT | |
| ►NKernel_OSG | In this namespace resides the OpenSG integration of OpenMesh |
| CArrayKernelT | Mesh kernel using arrays for mesh item storage |
| CAttribKernelT | This class adds the standard properties to the mesh type |
| CoPropertyT | Property adaptor for OpenSG GeoProperties |
| CPropertyKernel | Helper class, extending functionaliy of OpenMesh::BaseKernel to OpenSG specific property adaptors |
| CTraits | Base class for all mesh traits using the OSGArrayKernelT |
| CTriMesh_OSGArrayKernel_GeneratorT | Helper class to create a TriMesh-type based on Kernel_OSG::ArrayKernelT |
| CTriMesh_OSGArrayKernelT | Triangle mesh based on the Kernel_OSG::ArrayKernelT |
| ►NPredicates | |
| CBoundary | |
| CConjunction | |
| CDeleted | |
| CDisjunction | |
| CFeature | |
| CHidden | |
| CLocked | |
| CMemberFunctionWrapper | Wrapper object to hold an object and a member function pointer, and provides operator() to call that member function for that object with one argument |
| CNegation | |
| CPredicate | |
| CPredicateBase | |
| CRegular | |
| CSelected | |
| CTagged | |
| CTagged2 | |
| ►NSmoother | |
| CJacobiLaplaceSmootherT | Laplacian Smoothing |
| CLaplaceSmootherT | Laplacian Smoothing.
|
| CSmootherT | Base class for smoothing algorithms |
| ►NSubdivider | |
| ►NAdaptive | Software related to adaptive subdivision of meshes |
| CCompositeT | Adaptive Composite Subdivision framework |
| ►CCompositeTraits | Adaptive Composite Subdivision framework |
| CEdgeT | |
| CFaceT | |
| CState | Storage type for intermediate states and the final flag of a mesh entity |
| CVertexT | |
| CEdE | Composite rule EdE |
| CEdEc | Composite rule EdEc |
| CEF | Composite rule EF |
| CEV | Composite rule EV |
| CEVc | Composite rule EVc |
| CFE | Composite rule FE |
| CFF | Composite rule FF |
| CFFc | Composite rule FFc |
| CFV | Composite rule FV |
| CFVc | Composite rule FVc |
| CRuleHandleT | Handle template for adaptive composite subdividion rules |
| CRuleInterfaceT | Base class for adaptive composite subdivision rules |
| CState | |
| CTraits | |
| CTvv3 | Adaptive Composite Subdivision framework |
| CTvv4 | Topological composite rule Tvv,4 doing a 1-4 split of a face |
| CVdE | Composite rule VdE |
| CVdEc | Composite rule VdEc |
| CVE | Composite rule VE |
| CVF | Composite rule VF |
| CVV | Composite rule VV |
| CVVc | Composite rule VVc |
| ►NUniform | Software related to uniform subdivision of meshes |
| CCatmullClarkT | Based on code from Leon Kos, CAD lab, Mech.Eng., University of Ljubljana, Slovenia (http://www.lecad.fs.uni-lj.si/~leon) |
| CCompareLengthFunction | |
| ►CCompositeLoopT | Uniform composite Loop subdivision algorithm |
| ►CEVCoeff | Helper struct |
| Ccompute_weight | |
| ►CCompositeSqrt3T | Uniform composite sqrt(3) subdivision algorithm |
| ►CFVCoeff | Helper class |
| Ccompute_weight | |
| ►CCompositeT | This class provides the composite subdivision rules for the uniform case |
| CCoeff | Abstract base class for coefficient functions |
| ►CCompositeTraits | Uniform Composite Subdivision framework |
| CEdgeT | |
| CFaceT | |
| CVertexT | |
| CInterpolatingSqrt3LGT | Uniform Interpolating Sqrt3 subdivision algorithm |
| CLongestEdgeT | Uniform LongestEdgeT subdivision algorithm |
| CLoopT | Uniform Loop subdivision algorithm |
| CMidpointT | Midpoint subdivision algorithm |
| CModifiedButterflyT | Modified Butterfly subdivision algorithm |
| CSqrt3T | Uniform Sqrt3 subdivision algorithm |
| CSubdividerT | Abstract base class for uniform subdivision algorithms |
| ►NUtils | Collection of little utility classes and helpers |
| CHeapInterfaceT | This class demonstrates the HeapInterface's interface |
| CHeapT | An efficient, highly customizable heap |
| CMeshCheckerT | Check integrity of mesh |
| CNoncopyable | This class demonstrates the non copyable idiom |
| CNumLimitsT | This class provides the maximum and minimum values a certain scalar type (int, float, or double) can store |
| CTestingFramework | Helper class for test programms |
| CTimer | Timer class |
| ►NVDPM | Software related to view dependent progressive meshes |
| ►CMeshTraits | Mesh traits for View Dependent Progressive Meshes
|
| CVertexT | |
| CPlane3d | Ax + by + cz + d = 0 |
| CVFront | Active nodes in vertex hierarchy |
| CVHierarchy | Keeps the vertex hierarchy build during analyzing a progressive mesh |
| CVHierarchyNode | Vertex hierarchy node |
| CVHierarchyNodeHandle | Handle for vertex hierarchy nodes
|
| CVHierarchyNodeIndex | Index of vertex hierarchy node |
| CVHierarchyWindow | |
| CViewingParameters | |
| ►CArrayKernel | Mesh kernel using arrays for mesh item storage |
| CAutoStatusSetT | AutoStatusSetT: A status set that automatically picks a status bit |
| CExtStatusSetT | ExtStatusSet: A status set augmented with an array |
| CStatusSetT | — StatusSet API — |
| CAttribKernelT | The attribute kernel adds all standard properties to the kernel |
| CAutoPropertyHandleT | |
| CBaseHandle | Base class for all handle types |
| CBaseKernel | This class provides low-level property management like adding/removing properties and access to properties |
| CBaseMesh | Base class for all meshes |
| CBaseProperty | Abstract class defining the basic interface of a dynamic property |
| CBasePropHandleT | Base property handle |
| CCirculatorRange | Generic class for iterator ranges |
| CCirculatorRangeTraitT | |
| Ccolor_caster< osg::Color3f, osg::Color3ub > | Helper struct |
| Ccolor_caster< osg::Color3ub, osg::Color3f > | Helper struct |
| CConstPropertyViewer | |
| CDefaultTraits | Base class for all traits |
| CDefaultTraitsDouble | Version of Default Traits that uses double precision for points and normals as well as floating point vectors for colors |
| CEdgeHandle | Handle for a edge entity |
| CEndian | Determine byte order of host system |
| CEntityRange | Generic class for vertex/halfedge/edge/face ranges |
| CEPropHandleT | Handle representing an edge property |
| CFaceHandle | Handle for a face entity |
| ►CFilteredSmartRangeT | Class which applies a filter when iterating over elements |
| CFilteredIterator | |
| ►CFinalMeshItemsT | Definition of the mesh entities (items) |
| CITraits | |
| CFPropHandleT | Handle representing a face property |
| CHalfedgeHandle | Handle for a halfedge entity |
| CHandleToPropHandle | |
| CHandleToPropHandle< OpenMesh::EdgeHandle, T > | |
| CHandleToPropHandle< OpenMesh::FaceHandle, T > | |
| CHandleToPropHandle< OpenMesh::HalfedgeHandle, T > | |
| CHandleToPropHandle< OpenMesh::MeshHandle, T > | |
| CHandleToPropHandle< OpenMesh::VertexHandle, T > | |
| CHandleToPropHandle< void, T > | |
| CHPropHandleT | Handle representing a halfedge property |
| CLoopSchemeMaskT | Implements cache for the weights of the original Loop scheme supported: |
| CMergeTraits | Helper class to merge two mesh traits |
| CMeshCast | Cast a mesh with different but identical traits into each other |
| CMeshCast< const LhsMeshT &, const RhsMeshT & > | |
| CMeshCast< const LhsMeshT *, const RhsMeshT * > | |
| CMeshCast< LhsMeshT &, RhsMeshT & > | |
| CMeshCast< LhsMeshT *, RhsMeshT * > | |
| CMeshHandle | Handle type for meshes to simplify some template programming |
| CMPropHandleT | Handle representing a mesh property |
| CNormalConeT | /class NormalCone NormalCone.hh <OpenMesh/Core/Geometry/NormalConeT.hh> |
| ►CPolyConnectivity | Connectivity Class for polygonal meshes |
| CEdgeFaceTraits | |
| CEdgeHalfedgeTraits | |
| CEdgeVertexTraits | |
| CElementRange | |
| CElementRange< EdgeHandle > | |
| CElementRange< FaceHandle > | |
| CElementRange< HalfedgeHandle > | |
| CElementRange< VertexHandle > | |
| CFaceEdgeTraits | |
| CFaceFaceTraits | |
| CFaceHalfedgeTraits | |
| CFaceVertexTraits | |
| CVertexEdgeTraits | |
| CVertexFaceTraits | |
| CVertexHalfedgeTraits | |
| CVertexOppositeHalfedgeTraits | |
| CVertexVertexTraits | |
| CPolyConnectivityTag | Connectivity tag indicating that the tagged mesh has polygon connectivity |
| CPolyMesh_ArrayKernel_GeneratorT | Helper class to build a PolyMesh-type |
| CPolyMesh_ArrayKernelT | Polygonal mesh based on the ArrayKernel |
| CPolyMeshT | Base type for a polygonal mesh |
| CPropertyContainer | A a container for properties |
| CPropertyCreationManager | Class for adding properties based on strings |
| CPropertyCreator | Base class for property creators |
| CPropertyCreatorImpl | Helper class that contains the implementation of the create_<HandleT>_property methods |
| CPropertyManager | This class is intended to manage the lifecycle of properties |
| CPropertyT | Default property class for any type T |
| CPropertyT< bool > | Property specialization for bool type |
| CPropHandle | |
| CPropHandle< EdgeHandle > | |
| CPropHandle< FaceHandle > | |
| CPropHandle< HalfedgeHandle > | |
| CPropHandle< MeshHandle > | |
| CPropHandle< VertexHandle > | |
| CRandomNumberGenerator | Generate a random number between 0.0 and 1.0 with a guaranteed resolution ( Number of possible values ) |
| CRangeTraitT | |
| CSingletonT | A simple singleton template |
| CSmartBaseHandle | Base class for all smart handle types |
| CSmartEdgeHandle | |
| CSmartFaceHandle | |
| CSmartHalfedgeHandle | |
| CSmartHandle | |
| CSmartHandle< EdgeHandle > | |
| CSmartHandle< FaceHandle > | |
| CSmartHandle< HalfedgeHandle > | |
| CSmartHandle< VertexHandle > | |
| CSmartHandleBoundaryPredicate | Base class for all smart handle types that contains status related methods |
| CSmartHandleStatusPredicates | Base class for all smart handle types that contains status related methods |
| CSmartRangeT | Base class for all smart range types |
| CSmartTaggerET | |
| CSmartTaggerFT | |
| CSmartTaggerHT | |
| CSmartTaggerT | Smart Tagger |
| CSmartTaggerVT | |
| CSmartVertexHandle | Smart version of VertexHandle contains a pointer to the corresponding mesh and allows easier access to navigation methods |
| CStripifierT | This class decomposes a triangle mesh into several triangle strips |
| CTriConnectivity | Connectivity Class for Triangle Meshes |
| CTriConnectivityTag | Connectivity tag indicating that the tagged mesh has triangle connectivity |
| CTriMesh_ArrayKernel_GeneratorT | Helper class to create a TriMesh-type based on ArrayKernelT |
| CTriMesh_ArrayKernelT | Triangle mesh based on the ArrayKernel |
| CTriMeshT | Base type for a triangle mesh |
| CVDPMSynthesizerViewerWidget | |
| Cvector_caster< osg::Vec3d, osg::Pnt3d > | Convert Pnt3d to Vec3d |
| Cvector_caster< osg::Vec3f, osg::Pnt3f > | Convert Pnt3f to Vec3f |
| Cvector_caster< osg::Vec4d, osg::Pnt4d > | Convert Pnt4d to Vec4d |
| Cvector_caster< osg::Vec4f, osg::Pnt4f > | Convert Pnt4f to Vec4f |
| Cvector_traits | Helper class providing information about a vector type |
| Cvector_traits< Eigen::Matrix< _Scalar, _Rows, _Cols, _Options > > | |
| Cvector_traits< osg::Color3f > | Vector traits for OpenSG color type |
| Cvector_traits< osg::Color3ub > | Vector traits for OpenSG color type |
| Cvector_traits< osg::Color4f > | Vector traits for OpenSG color type |
| Cvector_traits< osg::Color4ub > | Vector traits for OpenSG color type |
| Cvector_traits< osg::Pnt2d > | Vector traits for OpenSG vector type |
| Cvector_traits< osg::Pnt2f > | Vector traits for OpenSG vector type |
| Cvector_traits< osg::Pnt3d > | Vector traits for OpenSG vector type |
| Cvector_traits< osg::Pnt3f > | Vector traits for OpenSG vector type |
| Cvector_traits< osg::Pnt4d > | Vector traits for OpenSG vector type |
| Cvector_traits< osg::Pnt4f > | Vector traits for OpenSG vector type |
| Cvector_traits< osg::Vec2f > | Vector traits for OpenSG vector type |
| Cvector_traits< osg::Vec3d > | Vector traits for OpenSG vector type |
| Cvector_traits< osg::Vec3f > | Vector traits for OpenSG vector type |
| Cvector_traits< osg::Vec4d > | Vector traits for OpenSG vector type |
| Cvector_traits< osg::Vec4f > | Vector traits for OpenSG vector type |
| Cvector_traits< osg::Vec4ub > | Vector traits for OpenSG vector type |
| CVectorT | |
| CVertexHandle | Handle for a vertex entity |
| CVPropHandleT | Handle representing a vertex property |
| ►CAnalyzerTraits | |
| CHalfedgeT | |
| CVertexT | |
| Cbinary< std::vector< bool > > | |
| CCirculatorT | Circulator |
| CCmdOption | |
| CCustomTraits | |
| CCustomTraitsVec2i | |
| CDecimaterViewerWidget | |
| CDecOptions | |
| CGnuplot | Utility class interfacing with Gnuplot |
| CGnuplotException | Exception thrown by class Gnuplot |
| CIteratorT | Linear iterator |
| CMeshViewerWidget | |
| CMeshViewerWidgetSubdivider | |
| CMeshViewerWidgetT | |
| CMeshViewerWidgetTraits | |
| CModBalancerT | |
| CMyData | |
| CMyDecimaterViewerWidgetTraits | |
| CMyDeleteGeometryExampleTraits | |
| CMyMConvertTraits | |
| ►CMyMeshSmootherExampleTraits | |
| CVertexT | |
| CMySmoothingTraits | |
| ►CMyTraits | |
| CVertexT | |
| COpenMeshBase | |
| COpenMeshBasePoly | |
| COpenMeshBasePolyVec2i | |
| COpenMeshBaseTriVec2i | |
| COption | |
| CPMInfo | |
| CProgTraits | |
| CProgViewerWidget | |
| CQGLViewerWidget | |
| CRegisteredDataType | |
| CRuleMap | |
| CSubdivideWidget | |
| CVectorT | |
